SBH-M.RL series

Oil lmmersed Amorphous Alloy Three-dimensional Wound Core Transformer

Oil immersed amorphous alloy three-dimensional wound core transformer breaks through the traditional planar core structure of transformers, combining the three-dimensional wound core structure with the low loss characteristics of amorphous alloys. It has the advantages of energy conservation, noise reduction, three-phase magnetic circuit balance, strong short-circuit resistance, high reliability, anti-theft, etc.

SBH Series

Oil lmmersed Amorphous Alloy Planar Wound Core Transformer

The core of the amorphous alloy transformer is made of amorphous alloy ribbon instead of traditional electrical steel strip (silicon steel sheet). The no-load loss and no-load current of amorphous alloy transformers are signifcantly reduced compared to silicon steel sheet transformers, indicating signifcant energy-saving and environmental benefts. Amorphous alloy is mainly composed of iron, boron, silicon, nickel, cobalt and carbon. Its magnetization power is small, which can significantly reduce no-load loss and no-load current.

SCBH Series

Amorphous Alloy Core Dry-typeTransformer

The core of the amorphous alloy core dry-type transformer is made of amorphous alloy ribbon: Its no-load loss and no-load current are signifcantly reduced compared to silicon steel sheet transformer. Its low-voltage coil adopts a foil structure to enhance its short-circuit resistance and its high-voltage coil adopts epoxy resin insulation material poured into a hard rigid structure, Amorphous alloy core dry-type transformer has good fre resistance and the epoxy resin combined with glass fber as the insulation material of the transformer has the characteristics of non-inflammable and easy to extinguish.

35KV Series

Oil lmmersed Three-phase(on-loadTap Changing) Power Transformer

The coil heat dissipation of the 35kV oil immersed three-phase on-load tap changing power transformer adopts a new oil passage structure with reasonable design and optimized insulation technology, which improves the mechanical strength and short-circuit resistance. The core is made of high-quality cold-rolled silicon steel sheets, with stepped three-level joints and surface coated with curing paint, reducing losses and noise, It runs reliably withbeautiful and elegant appearance.

S-M.RL Series

Oil lmmersed SiliconSteel Three-dimensional Wound Core Transformer

Oil immersed three-dimensional wound core transformer breaks through the traditional planar structure and adopts a three-phase symmetrical three-dimensional structure. Its three-phase core magnetic circuit is completely symmetrical and the magnetic resistance greatly reduces the excitation current and no-load loss. It is a transformer that uses traditional materials but has lower running noise and a more compact, effcient and energy-saving structure.

S-M Series

Oil lmmersed Silicon Steel Laminated Core Transformer

S-M series oil immersed fully sealed power transformer is an environmental friendly and energy-saving product developed in line with the national energy-saving and people-benefit project, based on the design of a new product structure, The core adopts high-quality and high-performance silicon steel sheets with high conductivity andlowloss, reducing no-loadloss.

10kV SC(B) Series

Epoxy Resin Dry-type Transformer

Epoxy resin dry-type transformers are designed and produced with the latest technology. The production process fully adopts the filling process and vacuum casting technology and the new process technology of "positive pressure casting". Therefore, this type of transformer is a high-performance product. It is used in high-rise buildings, commercial centers, hospitals, airports, stations, subways, ships, chemicals, tunnels, mines, residential areas and other places with strictfre prevention requirements.

20-35kV SC(B) series

SC(B) Series SpecialDry-typeTransformer

SC(B) type special dry-type transformer includes but not limited to:Wind power generation transformer ,Photovoltaic power generation transformer

High Voltage KYN Series

Metal-clad Withdrawable Ac Switchgear

High-voltage KYN series Metal-clad Withdrawable AC Switchgear is a complete set of three-phase AC 50HZindoor distribution equipment for power plant, substation and industrial and mining enterprise to receive and distribute three-phase electrical energy from the 50HZ power grid . it plays a role in controlling, protecting and detecting circuits, It can also be used in places with frequent operations and has complete "five prevention" functions.

HXGN

High-voltage Ring Main Unit

HXGN □-12 box type fxed indoor AC metal enclosed switchgear is suitable for indoor AC high voltage complete sets of equipment with rated voltage of 3.6-12KV and rated frequency of 50HZ. It is mainly used for three-phase AC ring network, terminal distribution network and industrial electrical equipment, as well as for receiving and distributing power. It meets the national standard GB3906 and IEC298, IEC420 standards.

XGN-12 Series

SF6 Insulated Ring Cabinet

XGN-12 series SF6 insulated ring cabinet (referred to as inflatable cabinet). A maximum of 6 units (regardless of incoming and outgoing lines) with a common busbar can be configured in the same air box and two (or more) air boxes can also be connected in the form of extended busbars, Each SF6 insulated gas box can be expanded on the left, right or top and also can be arranged according to different designschemes to meet different confguration requirements.

NTXGW-12

Outdoor Switchgear(Outdoor Ring Main Unit)

NTXGW-12 series outdoor switchgear is suitable for receiving and distributing electrical energy in 50Hz.12kV distribution networks. It can be connected and combined according to different design schemes to complete different distribution tasks. Integrating the functions of ring main unit and cable distribution box. Switching station can be equipped with multiple unit devices and the connection between each unit is convenient and reliable. The cable connection between the outgoing unit and the incoming unit has the characteristics of simplicity, speediness and safety.

DFW-12

High Voltage Cable Distribution Box

DFW-12 outdoor cable distribution box is widely used for ring network connection in 10kV power distribution systems and is an ideal equipment for urban network renovation, Distribution box is divided into two types: ordinary type and switch type. It can also be divided into ordinary type and flood control type according to the sealing level.

Low Voltage Integrated Distribution Box

Low Voltage Integrated Distribution Box, Product Features:•Economy •Safety •Advanced  •Aesthetic 

GCS

Low-voltage Drawer Type Switchgear

GCS low-voltage drawer type switchgear is widely used in power distribution systems for metallurgy, electricity, chemical, petroleum seaports, airports, subways, commercial and residential industries. ln places with high automation levels such as large power plants and petrochemical systems that require computer interfaces, Low-voltage complete distribution device is used for power distribution, motor centralized control and reactive power compensation in power generation and supply systems with a three-phase AC frequency of 50(60)Hz, rated operating voltage of 380V (400V, 660V) and rated current of 4000A or below.

GGD

GGD AC Low Voltage Distribution Cabinet

GGD AC low-voltage distribution cabinet's incoming methods include upper, lower, left, middle, right and rear of cabinet top, which aim to meet the actual needs of various engineering projects for different incoming lines. At the same time, there are fixed positions inside the cabinet for installing electromechanical protection and automatic devices for power plants and special users. It has the characteristics of high breaking capacity, good dynamic and thermal stability, flexible electrical scheme, convenient assembly, strong practicality, novel structure andhigh protection level.

YB Series

European style Box-type Substation

YB series prefabricated substation is suitable for terminal distribution of l0KV system ring network and radial power grid supply, It is widely used in outdoor places such as cities, roads，parks, mines, etc.

ZGS Series

American Style Box-type Substation

ZGS□-□-□/□ series combination transformer is a combination transformer in which the active part, high-voltage load switch, fuse and other protective components are immersed in transformer insulation oil. If high ignition point insulation oil (ignitionpoint>312'C) is used, it can be installed in special occasions with high fre and explosion preventionrequirements.

New Energy

(Wind/photovoltaic)Power Generation Combined Box-type Substation

ZGS series new energy (wind/photovoltaic) power generation combination box-type substation is a combination transformer used for wind or photovoltaic power generation, which integrates step-up transformer's, high-voltage current limiting fuses, load switches, low-voltage switchgear and corresponding auxiliary supporting equipment. Capacity range is 500-6800kVA, and the voltage level is 35kV and below, It is suitable for various onshore, pond, offshore photovoltaic and wind power plants.

YBD

Pre-installed Buried Substation (Buried Box-type Substation)

YBD pre-installed buried substation is composed of transformer part buried underground and high and low voltage distribution cabinet part located above ground. It is widely used in urban buildings, both sides of roads, residential areas, municipalfacilities, mines, oil felds, ports, tourist attractions, etc.